Doctor's Woodshop High Build Friction Polish Doc-103
HIGH BUILD FRICTION POLISH
- High luster shine
- Easily restored finish
- Excellent wood sealer
- Excellent preparation layer for paste wax
- 16 oz bottle
For creating depth of finish, the Doctor's Woodshop High Build Friction polish is among the very best. This is a new version of the classic oil/shellac friction polish, replacing boiled linseed oil with Walnut oil. Walnut oil does not cloud the figure of the wood or darken with age. The surface of the work piece should be finish sanded, with all sanding marks removed. For most pieces, especially my pepper mills, sanding through 1000 grit is the norm. It doesn’t take that long with good quality sandpaper and a sanding lubricant like Doctor’s Woodshop Walnut Finishing Oil.
Applied to the spinning work piece surface with a soft paper towel, Doctor’s Woodshop High Build Friction Polish dries quickly to give a hard lustrous finish. It also serves as an excellent sealing coat for a wax or lacquer finish. After applying at slow speed to cover the surface, buffing at high speed will speed up the curing process. Allowing the surface to cool for a few minutes between layers is recommended. Doctor’s Woodshop High Build Friction Polish can also be applied with a traditional French polish cloth mop for use on cabinetwork and other woodworking projects where a French polish finish is desired.
THIS PRODUCT CAN ONLY BE SHIPPED BY GROUND
Type of Wax:
Great for bringing out figure and grain